Publications
2024年
| 1 |
Zhengyin Yuan, Akihiko Horibe, Wael I.A. Aly, Kunfeng Liang, Yutaka Yamada, Kazuma Isobe,
"Heat-transfer characteristics of the two-phase-change process between a microencapsulated phase-change-material-slurry droplet and air: A numerical study,"
International Communications in Heat and Mass Transfer, 155, 107497 (2024). Available online |
|---|---|
| 2 |
JikSu Yu, Akihiko Horibe, Naoto Haruki,
"Melting and solidification characteristic of mixture of two types of latent heat storage material in direct contact heat exchanger,"
Experimental Heat Transfer, 37, 1 (2024). Available online |
| 3 |
Kazuma Isobe, Yutaka Yamada, Akihiko Horibe, Katsunori Hanamura,
"Radiative energy transfer via surface plasmon polaritons around metal–insulator grating: For better understanding of magnetic polariton,"
Journal of Thermal Science and Technology, 19 (1), 23-00531 (2024). Available online |
| 4 |
Shun Matsuzaki, Akihiko Horibe, Yutaka Yamada, Kazuma Isobe,
"Production and characteristic measurement of latent heat emulsion as a phase change cold storage material,"
Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, 23-26_OA, 1 (2024). (In Japanese) Available online |
| 5 |
Kazuma Isobe, Tsuyoshi Yamamoto, Yutaka Yamada, Akihiko Horibe,
"Bayesian optimization of periodic multilayered slabs for passive absorptivity control,"
International Journal of Heat and Mass Transfer, 221, 125047 (2024). Available online |
2023年
| 1 |
Yutaka Yamada, Kodai Okano, Kazuma Isobe, Akihiko Horibe,
"Water/ice mixture- and freezing-front motion in a nonisothermal liquid bridge,"
Applied Physics Letters, 123, 231601 (2023). Available online |
|---|---|
| 2 |
Yutaka Yamada, Kazuma Isobe, Akihiko Horibe,
"Analysis of evaporation of droplet pairs by a quasi-steady-state diffusion model coupled with the evaporative cooling effect,"
Langmuir, 39 (44), 15587 (2023). Available online  |
| 3 |
Rikio Shimoyama, Yutaka Yamada, Kazuma Isobe, Akihiko Horibe,
"Natural convective heat transfer from a heated horizontal disc with heated hollow cylinders: Effect of flow characteristics around heated cylinders with a gap,"
International Communications in Heat and Mass Transfer, 146, 106928 (2023). Available online |
| 4 |
Kyosuke Okuno, Kazuma Isobe, Akihiko Horibe, Yutaka Yamada,
"Synthesis and characterization of silica-encapsulated n-tetracosane and the effect of surface modification by silane coupling agents,"
International Journal of Thermophysics, 44, 69 (2023). Available online |
| 5 |
Yutaka Yamada, Takeru Sato, Kazuma Isobe, Wael I. A. Aly, Akihiko Horibe,
"Thermal energy storage performance enhancement of microencapsulated n‑tetracosane with a polymorph-modulated calcium carbonate shell,"
Energy & Fuels, 37, 3152 (2023). Available online |
| 6 |
Zhengyin Yuan, Akihiko Horibe, Kunfeng Liang, Yutaka Yamada, Kazuma Isobe, Yonghao Xue
"Experimental evaluation of latent heat use of a microencapsulated phase change material slurry in spraying,"
International Journal of Heat and Mass Transfer, 201 (1), 123573 (2023). Available online |
2022
| 1 |
Yutaka Yamada, Kazuma Isobe, Akihiko Horibe,
"Droplet motion on a wrinkled PDMS surface with a gradient structural length scale shorter than the droplet diameter,"
RSC Advances, 12, 13917 (2022). Available online |
|---|---|
| 2 |
Kazuma Isobe, Yutaka Yamada, Akihiko Horibe,
"Generic Method to Evaluate Directional Radiative Property Using a Computer Graphic Renderer,"
Thermal Science and Engineering, 30 (2), 23 (2022). (In Japanese) Available online |
| 3 |
Kazuma Isobe, Katsunori Hanamura,
"Resonance modes of a metal-semiconductor-metal multilayer mediated by electric charge,"
Journal of Physics Communications, 6, 045006 (2022). Available online |
| 4 |
Kazuma Isobe, Minoru Tomioka, Yutaka Yamada, Akihiko Horibe,
"Absorptivity control over the visible to mid-infrared range using a multilayered film consisting of thermochromic vanadium dioxide,"
International Journal of Thermophysics, 43, 44 (2022). Available online |
| 5 |
Zhengyin Yuan, Kunfeng Liang, Yonghao Xue, Yutaka Yamada, Kazuma Isobe, Akihiko Horibe,
"Experimental study of evaluation of dynamical utilization of a microencapsulated phase change material slurry based on temperature range matching analysis,"
International Communications in Heat and Mass Transfer, 130, 105788 (2022). Available online |
2021
| 1 |
Yutaka Yamada, Eiji Sakata, Kazuma Isobe, Akihiko Horibe,
"Wettability difference induced out-of-plane unidirectional droplet transport for efficient fog harvesting,"
ACS Applied Materials & Interfaces, 13 (29), 35079-35085 (2021). Available online |
|---|
2020
| 1 |
Yutaka Yamada, Akihiko Horibe,
"Thermal properties and related core/shell structure of n-tetracosane microencapsulated by calcium carbonate,"
Applied Thermal Engineering, 178, 115512 (2020). Available online |
|---|---|
| 2 |
Kazuma Isobe, Ryota Okino, Katsunori Hanamura,
"Spectral absorptance of a metal-semiconductor-metal thin-multilayer structured thermophotovoltaic cell,"
Optics Express, 28 (26), 40099-40111 (2020). Available online |
2019
| 1 |
Naoto Haruki, Akihiko Horibe, Yutaka Yamada,
"Heat storage and release behavior in a thin vessel heat storage unit using salt hydrate latent heat storage material,"
Heat and Mass Transfer, 55, 2797-2807 (2019). Available online |
|---|---|
| 2 |
Akihiko Horibe, Yutaka Yamada,
"Moisture transfer between two air flows using a two-vessel circulating-fluidized-bed by air with particulate sorbent －1st report: Making a prototype of system and basic moisture transfer characteristics－,"
Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, 36, 141-148 (2019). (In Japanese) Available online |
| 3 |
Yutaka Yamada, Genki Onishi, Akihiko Horibe,
"Sessile droplet freezing on hydrophobic structured surfaces under cold ambient conditions,"
Langmuir, 35, 16401-16406 (2019). Available online  |
2018
| 1 |
Than Tun Naing, Akihiko Horibe, Naoto Haruki, Yutaka Yamada,
"Reduction of the solidification height of phase-change material in direct latent heat storage vessel,"
Thermal Science & Engineering, 36, 19-27 (2018). Available online |
|---|---|
| 2 |
Yutaka Yamada, Akihiko Horibe,
"Discontinuous contact line motion of evaporating particle-laden droplet on superhydrophobic surfaces,"
Physical Review E, 97, 043113 (2018). Available online |
| 3 |
Yutaka Yamada, Kanoko Taguchi, Tatsuya Ikuta, Akihiko Horibe, Koji Takahashi,
"Meniscus motion and void generation inside carbon nanotubes,"
Journal of Physical Chemistry C, 122, 21910-21918 (2018). Available online |
| 4 |
Santiago Madruga, Naoto Haruki, Akihiko Horibe,
"Experimental and numerical study of melting of the phase change material tetracosane,"
International Communications in Heat and Mass Transfer, 98, 163-170 (2018). Available online |
| 5 |
Shin-ichi Morita, Yasutaka Hayamizu, Hiroyuki Nakamura, Takanobu Yamada, Akihiko Horibe,
"Study of growth promotion of agricultural products by soil temperature regulate cultivation in ground and high-bench ridge,"
Thermal Science & Engineering, 26 (4), 73-84 (2018). (In Japanese) Available online |
2017
| 1 |
Than Tun Naing, Akihiko Horibe, Naoto Haruki, Yutaka Yamada,
"Melting and solidification heat transfer characteristics of a phase-change material in a latent heat storage vessel: effects of a perforated partition plate and metal fiber,"
Journal of Power and Energy Engineering, 5, 13-29 (2017). Available online |
|---|---|
| 2 |
Akihiko Horibe, Hyungsup Im, Yutaka Yamada, Naoto Haruki,
"Heat transfer characteristics of upper/lower surface heating of microcapsule slurry in a horizontal duct,"
Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, 34, 353-363 (2017). (In Japanese) Available online |
| 3 |
Naoto Haruki, Akihiko Horibe,
"Performance maintenance of dye-sensitized solar cells using a latent heat storage material,"
International Journal of Thermophysiscs, 38, 103 (2017). Available online |
| 4 |
Rikio Shimoyama, Akihiko Horibe, Naoto Haruki,
"An experimental study of flow and heat transfer characteristics of natural convection heat transfer from a horizontal heated surface with a heated cylinder,"
Heat and Mass Transfer, 54, 185-192 (2018). Available online |
2016
| 1 |
Shin-ichi Morita, Kota Tanimura, Yasutaka Hayamizu, Takanobu Yamada, Akihiko Horibe, Naoto Haruki, Toshiaki Setoguchi,
"Study of cycle output improvement by work-fluid including phase change material,"
Journal of Thermal Science , 25, 558-563 (2016). Available online |
|---|---|
| 2 |
Shin-ichi Morita, Yasutaka Hayamizu, Akihiko Horibe, Naoto Haruki, Takanobu Yamada,
"Calorific value and viscosity of cooking oil mixed W/O emulsion fuel,"
Netsu Bussei, 30 (2), 80-85 (2016). (In Japanese) Available online |
| 3 |
JikSu Yu, Akihiko Horibe, Naoto Haruki, Akito Machida, Masashi Kato,
"Melting and solidification characteristics of a mixture of two types of latent heat storage material in a vessel,"
Heat and Mass Transfer, 52, 2563-2574 (2016). Available online |
2015
| 1 |
Akihiko Horibe, Hyeon Jang, Naoto Haruki, Yoshihiko Sano, Hiroaki Kanbara, Kazuo Takahashi,
"Melting and solidification heat transfer characteristics of phase change material in a latent heat storage vessel: Effect of perforated partition plate,"
International Journal of Heat and Mass Transfer, 82, 259-266 (2015). Available online |
|---|---|
| 2 |
Shin-ichi Morita, Yasutaka Hayamizu, Ryo Kuwagaki, Hiroyuki Nakamura, Takanobu Yamada, Akihiko Horibe, Naoto Haruki,
"Study of growth promotion of agricultural products by ground heat soil warming,"
Thermal Science and Engineering, 23 (1), 5-13 (2015). (In Japanese) Available online |
| 3 |
Naoto Haruki, Akihiko Horibe, Yoshihiko Sano,
"Freezing behavior and freeze concentration characteristics of the aqueous suspension of nano or micro particles,"
Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, 32 (2), 135-147 (2015). (In Japanese) Available online |
| 4 |
Rikio Shimoyama, Akihiko Horibe, Naoto Haruki, Yoshihiko Sano, Syouta Shirasawa,
"Natural convection heat transfer from upward-facing horizontal heated surface with heated cylindrical pipe (Effects of design parameters),"
Transactions of the JSME, 81 (824), 14-00400 (2015). (In Japanese) Available online |
| 5 |
Naoto Haruki, Akihiko Horibe, Yoshihiko Sano, Kohei Hachiya,
"Influence of volumetric fiber fraction and heating temperature on heat transfer characteristics of latent heat storage paraffin with aluminum fiber materials,"
Journal of Porous Media, 18 (824), 997-1008 (2015). Available online |
| 6 |
Y. Sano, A. Horibe, N. Haruki, A. Nakayama,
"A volume-averaging approach for analyzing a spiral-wound reverse osmosis desalination module,"
Journal of Porous Media, 18, 1149-1158 (2015). Available online |
2014
| 1 |
Shin-Ichi Morita, Yasutaka Hayamizu, Takanobu Yamada, Akihiko Horibe, Naoto Haruki, Toshiaki Setoguchi, Kazuma Adachi,
"Heat transfer characteristics of work fluid including phase change material that flow into heating surface from narrow path,"
Open Journal of Fluid Dynamics, 4, 52858 (2014). Available online |
|---|
2013
| 1 |
Naoto Haruki, Akihiko Horibe,
"Flow and heat transfer characteristics of ice slurries in a helically-coiled pipe,"
International Journal of Refrigeration, 36 (4), 1285-1293 (2013). Available online |
|---|---|
| 2 |
Shin-ichi Morita, Yasutaka Hayamizu, Akihiko Horibe, Naoto Haruki, Hideo Inaba,
"Experimental study on latent heat storage characteristics of W/O Emulsion -Supercooling rate of dispersed water drops by direct contact heat exchange-,"
Journal of Thermal Science, 22 (2), 145-151 (2013). Available online |
| 3 |
Akihiko Horibe, Sukmawaty, Naoto Haruki, Daiki Hiraishi,
"Sorption desorption operations on two connected fluidized bed using organic sorbent powder,"
International Journal of Heat and Mass Transfer, 65, 817-825 (2013). Available online |
| 4 |
Akihiko Horibe，Hyeon Jang, Naoto Haruki, Kazuo Takahashi,
"Direct contact latent heat storage system using erythritol as a latent heat storage material,"
Thermal Science & Engineering, 21 (4), 83-93 (2013). (In Japanese) Available online |
| 5 |
Rikio Shimoyama, Akihiko Horibe, Naoto Haruki, Yoshihiko Sano,
"Natural convection heat transfer from upward-facing horizontal heated surface with heated cylindrical pipe (Effects of flow characteristic around heated cylinder),"
Transactions of the Japan Society of Mechanical Engineers Series B, 79 (806), 2289-2300 (2013). (In Japanese) Available online |
| 6 |
Yoshihiko Sano, Jun Adachi, Akira Nakayama,
"A porous media theory for characterization of membrane blood oxygenation devices,"
Heat Mass Transfer, 49 (7), 973-984 (2013). Available online |
| 7 |
Kenji Ando, Hidekazu Hirai, Yoshihiko Sano,
"An accurate experimental determination of interstitial heat transfer coefficients of ceramic foams using the single blow method,"
The Open Transport Phenomena Journal, 5, 7-12 (2013). Available online |
| 8 |
Yoshihiko Sano, Shinji Iwase,
"Optimal design of a silicon carbide ceramic foam solar volumetric receiver,"
Open Journal of Heat, Mass and Momentum Transfer, 1, 1-12 (2013). |
2012
| 1 |
Akihiko Horibe, Naoto Haruki, Yuki Nishina, Hiroaki Miyauchi,
"Dehumidification characteristics of organic sorbent rotor under various double ventilation routes -1st Report: Dehumidification characteristics of various routes-,"
Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, 29 (1), 119-130 (2012). (In Japanese) Available online |
|---|---|
| 2 |
Akihiko Horibe, Naoto Haruki, Hiroaki Miyauchi, Yuki Nishina,
"Dehumidification characteristics of organic sorbent rotor under various double ventilation routes -2nd Report: Dehumidification characteristics with a heat pump-,"
Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, 29 (1), 131-140 (2012). (In Japanese) Available online |
| 3 |
Akihiko Horibe, Naoto Haruki, Wataru Inaba,
"Sorption and desorption characteristics of a block-type organic-sorbent desiccant unit,"
Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers, 29 (1), 153-162 (2012). (In Japanese) Available online |
| 4 |
Akihiko Horibe, Sukmawaty, Naoto Haruki, Daiki Hiraishi,
"Continuous sorption and desorption of organic sorbent powder in two connected fluidized beds,"
Journal of Thermal Science and Technology, 7 (4), 563-576 (2012). Available online |
| 5 |
Akihiko Horibe, Rikio Shimoyama, Naoto Haruki, Akira Sanada,
"Experimental study of flow and heat transfer characteristics of natural convection in an enclosure with horizontal parallel heated plates,"
International Journal of Heat and Mass Transfer, 55, 7072-7078 (2012). Available online |
2011
| 1 |
Naoto Haruki, Akihiko Horibe,
"Flow drag and heat transfer reduction characteristics of organic brine (potassium acetate) and inorganic brine (calcium chloride) solutions with non-ionic surfactant,"
Advances in Mechanical Engineering, 3, 1-10 (2011). Available online |
|---|---|
| 2 |
Naoto Haruki, Akihiko Horibe, Keigo Nakashima,
"Anisotropic effective thermal conductivity measurement of various kinds of metal fiber materials,"
International Journal of Thermophysics, 34, 2385-2399 (2011). Available online |
| 3 |
Akihiko Horibe, JikSu Yu, Naoto Haruki, Akihira Kaneda, Akito Machida, Masashi Kato,
"Melting characteristic of mixtures of two kinds of latent heat storage material,"
Netsu Bussei, 25 (3), 136-142 (2011). (In Japanese) Available online |
| 4 |
Akihiko Horibe, Rikio Shimoyama, Akira Sanada,
"Natural convection heat transfer from horizontal heated plates in an enclosure(Effects of design parameters),"
Transactions of the Japan Society of Mechanical Engineers Series B, 77 (781), 1801-1812 (2011). (In Japanese) Available online |
| 5 |
堀部明彦,
"有機系収着剤を用いた空調システム,"
建築設備と配管工事, 49 (11), 6-9 (2011). (In Japanese) |
| 6 |
堀部明彦,
"デシカント空調をめぐる最近の動向,"
設備と管理, 45 (11), 52-58 (2011). (In Japanese) |
2010
| 1 |
Naoto Haruki, Akihiko Horibe, Yuta Kawamoto, Hideo Inaba,
"Anisotropic thermal conductivity characteristics of metal fiber materials,"
Netsu Bussei, 24 (1), 9-14 (2010). (In Japanese) Available online |
|---|---|
| 2 |
Rikio Sshimoyama, Akira Sanada, Akihiko Horibe,
"Natural convection heat transfer from horizontal heated plates in an enclosure : Effects of interval of heated plates on flow characteristics(Thermal engineering),"
Transactions of the Japan Society of Mechanical Engineers Series B, 76 (764), 625-633 (2010). (In Japanese) Available online |